Magnetic Chutes

Magnetic Chute is usually suitable for removal Medium to fine contaminants. When product come into the chute, it stream down to the plate magnet. The iron contaminants attracted by the magnetic field flux while products pass directly.

 

Another design of magnetic chute is for vertical line, something like Hump magnet which requires sufficient height to install. However, This magnet separator is ideal option when allowable mount space is very limited. Deep reach magnet is applied to remove medium to large contaminants, such as nuts, bolts, nails which will damage the following equipment seriously. So it is usually installed at the fore-end of production process, such as material inlet position. Two powerful plates fixed on the opposite sides of housing to capture contaminants out of the passing products. An angle baffle placed in the center of inlet to compel products toward two opposite plates.

 

Features: 1. Finishing: The housing can be sand blasted or Brushed finish 2. Material: All the materials are 100% stainless steel. 3. Magnet: Either rare-earth magnet or Ferrite Magnet 4. Type of connection: Round or Square is available to your existing line. 5. Customer designs, specifications can be fulfilled. Application Area Any powder, granular materials, lumpy is also suitable.

How to do cleaning?

In order to ensure perfect performance, it has to check periodically. Once it need to be cleaned, release latch and do the wiping. Use extreme caution and wear gloves during the process.

How to select our products?
Please advise us the above necessary information to make enquiry. If you are not in a position to offer such information, also please feel free to contact our engineer and discuss the application condition, like material viscosity, hourly volume and so on.