Products
Home > Magnetic Separators > Drawer Magnet, Drawer Magnetic Separators - YATE MagneticsDrawer Magnetic Separators
YT Drawer Magnetic Separators (Drawer Magnets) are ideal for removing medium and fine ferrous contaminants from a range of dry free flowing products. They are widely used in food industry and chemical industry. Magnetic bars inside housing emit high magnetic field across the gaps between them. When material flows into the top of the housing, it is forced to cascade in a zig-zag pattern from row to row over the magnetic tubes, which ensures maximum tramp metal captured since the product comes in direct and repeated contact with a magnet as it travels through the magnetic drawer housing.
  |
Construction: YT magnetic drawer are constructed by a group of magnetic grates and housing. It would be one layer or multiple layers inside the housing which depend on the material condition. Usually, a magnetic drawer is installed into the pipeline. So mounting way have to be decided by customer. Features: 1. Finishing: Fine polishing and well welding to meet food grade. 2. Material: All the frames and housing are stainless steel with seamless steel tube 3. Magnet: High strength rare-earth Magnet. 4.Working Temperature: Standard magnetic drawer working temperature is ≦ 80℃, but if higher temperature is required, we can offer up to 350℃ to meet your special applications 5. Type of mounting: Round or Square, flange or quick release clamp are decided by customer 6. As rare earth magnets are extremely powerful and tramp metal is very difficult to remove by hand. We are ready to offer you an easy-clean design type drawer magnet. 7. Customer designs, specifications can be fulfilled. Application area: There magnetic drawers are used in production lines where products are of dry powder and granular, while contaminants are relatively small and fine. How to do cleaning? Drawer Magnets should be cleaned periodically for the most efficient performance. To clean the magnetic tubes, release the latch first and open the door. Remove the grate assemblies one at a time. Remove the tramp metal by hand. Use extreme caution and wear gloves during the process. How to select our products? Please advise us the above necessary information to make enquiry. If you aren’t in a position to offer these information, please feel free to contact our engineer and acquaint us with the application environment and material condition. |
 |
Features:
1. Finishing: Fine polishing and well welding to meet food grade.
2. Material: All the frames and housing are stainless steel with seamless steel tube
3. Magnet: High strength rare-earth Magnet.
4.Working Temperature: Standard working temperature is≦80℃, but if high temperature is required, we can offer up to 350℃ to meet your special applications
5. Type of mounting: Round or Square, flange or quick release clamp are decided by customer
6. As rare earth magnets are extremely powerful and tramp metal is very difficult to remove by hand. We are ready to offer you an easy-clean design type drawer magnet.
7. Customer designs, specifications can be fulfilled.
Round inlet/outlet
Square inlet/outlet
Remark:
"MD" stand for magnetic drawer.
"D" stand for double rows.
"S" stand for square flange top.
"R" stand for round flange top.
1. Finishing: Fine polishing and well welding to meet food grade.
2. Material: All the frames and housing are stainless steel with seamless steel tube
3. Magnet: High strength rare-earth Magnet.
4.Working Temperature: Standard working temperature is≦80℃, but if high temperature is required, we can offer up to 350℃ to meet your special applications
5. Type of mounting: Round or Square, flange or quick release clamp are decided by customer
6. As rare earth magnets are extremely powerful and tramp metal is very difficult to remove by hand. We are ready to offer you an easy-clean design type drawer magnet.
7. Customer designs, specifications can be fulfilled.
Round inlet/outlet
 |
 |
Square inlet/outlet
 |
 |
Remark:
"MD" stand for magnetic drawer.
"D" stand for double rows.
"S" stand for square flange top.
"R" stand for round flange top.